Brand New, Perfect FlameThrower
Incandescent Sequential Turn Signal System for a 1996-2004 Mustang
Coupe, Convertible or Fastback, GT with factory standard OEM brake and
turn signal lighting and wiring, except those with Amber turn signal
systems
What you get is One Pair (one left side and one right side) of rear
Brake and Sequential Turn Signal Incandescent Harnesses. Wired in each
harness assembly is our Sequential Turn Signal Controller.
The FlameThrower System comes with a
super-easy Installation Guide, Wiring Diagrams and Mustang Brake &
Tail Light System Troubleshooting Guide (download a copy, use the button
above). The FlameThrower is dirt
simple to install.
Saves you time by not having to splice or wire anything to install these
harnesses on your Mustang. Simple Plug and Play painless installation.
Use your existing incandescent lamps. And the installation is completely
reversible if you want to move it to another Mustang.
Installation is a snap: Remove your Brake Light Lens Assemblies, pull
the lamp connectors from each lamp from the lens assemblies, transfer
your incandescent lamps to the new Sequential Harnesses, install new
Harnesses, and reinstall lens assemblies back onto vehicle. Done.
This is a small wrench operation, simply remove 4 nuts - No Wire
Cutting, No Splicing into your system, Simply Plug and Play.
As a bonus, the FlameThrower Sequential
Harness System actually adds another brake light function to your
existing 2 brake light harness. Now you get 3
bright brake lights
on each side along with your new Sequential Turn Signals.
The FlameThrower is instantly
reversible back to your original incandescent system, if you want to
transfer your Sequential Turn Signals system to another vehicle.
Review the Sequencer video above. This is how your new FlameThrower
Sequential Turn Signals will operate.
NOTE: The FlameThrower Sequential
Brake Light system is compliant in all 50 states (thanks to Thunderbird,
Cougar, the new Mustang, and other production vehicles). If there is a
question, before you buy check with your local transportation
authorities. Don't spoil your driving fun with an equipment violation,
if sequential turn signal lights are not approved in your local
area!
State DOT requires that a vehicle's brake light comes on and stays on as
long as the brake pedal is pressed. Our system is compatible - one brake
light comes on and stays on (on each side), then the remaining two
segments on each side sequence once and then remain on, until the brake
pedal is released. .
Should for any reason the Sequencer fail, our system is designed to
light at least one brake light and all of the parking lights on each
side - enough to get you home safely.
These FULLY TESTED units are being offered WITH A FULL 90-DAY PARTS
REPAIR OR REPLACEMENT WARRANTY (our choice) ON THE SEQUENCER HARNESS.
Customer is responsible for removal, installation and warranty shipping
costs.
* Except Amber Tail Light
Systems